We offer two standard styles of designer's Decorative and Duplex wall plates that fits standard electrical wall boxes and floor boxes making installation easier and cost effective. The Decorative and Duplex wall plates use "series I snap-in modules" for different combination of keystone jack and other connectors.

ikCom's decorative 15-pin VGA/RGB feed thru wall plate and DisplayPort wall plate is used for linking a remove monitor/display. Additional four openings on the insert for ikcom's Series I H.D. snap-in modules and Keystone Jacks provide most optimum usage on a single gang space.

Our HDMI Decorative jack allows user to terminate HDMI connector for in-wall connections. It has a 90 degree feed-thru internal connector and rotatable orientation design accepts HDMI cable drop from upward, upward as well as sideward to minimize cable bending.

The Audio/Video Wall Plate offer various choices of audio/video connection, which accommodate with one, two, three or four audio (RCA or banana) or video connectors. That helps you building actually what exactly required at the site.

The series I "Snap-In Module" flush mount wall plates will fulfill the most complicated station installation requirements through a wide selection of snap-in modules. A variety of jacks and connectors will fill the wall plate openings to meet your specific requirements of voice, data, audio, video, fiber optic and etc. Write-on designation label with holder are provided for identifying different system or station.

The Series II flush mount wall plates are designed to insert snap-in modules for different configuration of jacks and connectors for maximum installation flexibility. "Snap-in module" comes in three sizes - 1/2" height, 1" height flat modules and 1-1/2" height 45 degree angled modules for bend radius protection of fiber and copper cabling. A single gang wall plate opening can accommodate three 1" flat module or two 1-1/2" angled modules.

"Snap-in module" can be easily snapped out of the front of plate, so that changes can be made without removing the plate after installation. Write-on designation labels with clear plastic holders for system or station identification.

The LJ6C British type flush mount wall plate is made of UL 94V0 with single or double 25 x 39mm openings. Modules in blank, with shutter or without shutter provides different options of optimal using of the faceplate.

The British type multi-media modules are in size of 50x50mm or 25x50mm for use with British EURO type wall plate, wide selection of different multi-media connector type for Audio/Video cabling.

The low profile British type wall plate was made of UL 94V0 with 50 x 50mm and 50 x 100mm two opening options. Voice module, data module and blank module are in 50 x 50mm or 25 x 50mm to provide optimal using of the faceplates. The wall plate with brush is ideal solution to exit the cables through A/V equipment. Use it behind TVs and other AV equipment to avoid unnecessary connections and terminations, yet keeps the outlet looking clean and tidy.

The European type wall plate is made of 94V0 with outside dimension 80 x 80mm. The clip on assembly design of wall plate frame and modules is easy for installation and maintenance.

1-, 2- & 3-port wall plate modules are with angled opening, this advantage the cable bending after Keystone Jack installation.

The British standard wall plate in size of 85mm x 85mm and design for use with EmCom series II snap-in modules for different configurations of jacks and connectors. Write-on designation label with holder for different system or station identification.

Snap-in modules can be easily snapped out of the front of wall plate, so the changes can be made without removing the wall plate after installation.

The clip on assembly design of wall plate frame and modules is easy for installation and maintenance.

The flush mount wall plate is made of UL 94V0 with 45 x 45mm inside opening. Modules are in size 45 x 45mm or 22.5 x 45mm to provide single port or dual port loading ability for all ikcom Keystone Jack.

The Japanese type wall plates are designed to insert snap-in modules for different configuration of jack and connectors for maximum installation flexibility. Wall plates are available in 1, 2 and 3-port. The snap-in modules are designed for use with Japanese type wall plates. Snap-in modules include BNC, RCA and F connector.

The Category 5e, Category 6 and Category 6A keystone jack module is designed for superior performance that meets or exceeds industry standard according to ANSI/TIA 568.2-D and ISO/IEC 11801 2nd edition.

The Series I keystone snap-in modules are designed for use with series I wall plates. The "H.D. version" modules are particularly suitable for DJAS0400, DJAS0600 and high-density blank panels.

IK COM's Adapter for Australian Outlet is designed for seamless integration with Keystone Jack bezels, including C type and H type, ensuring compatibility with structured cabling systems. Available in white (WH) and ivory (IV) colours.

Accommodates series I & II single gang flush mount wall plate for mounting on wall or cabinet. Breakouts on four sides for cable entry. Available in two heights for different depth needs. The rectangular wall box is for fiber mounting option for installations that need extra space behind the faceplate. The 37mm (1.45in.) ring is especially useful to ensure the proper bend radius for optical fiber or other multimedia applications.

The snap-in module surface mount boxes feature a compact, easy-to-install design. Snap-on top cover with write-on designation label and clear cover, self-adhesive tape and magnet for metal surface mounting are supplied with the box.

Use only 1" height "Snap-in Module" for different configuration of jacks and connectors for maximum installation flexibility. Module can be easily snapped out of the front of box so that changes can be made without opening the box.

Breakouts on three sides of the box for raceway or cable entry, raceway sizes: 3/4"(W) x 1/2"(H), 1-1/4"(W) x 3/4"(H) or 1-3/4" (W) x 1"(H).

The surface mount box comes in one or two ports. Boxes supplied with mounting screws and adhesive tape. Boxes meet ANSI/TIA 568-2-D Category 5e specifications, both shielded and unshielded version are available.

The keystone jack wall mount boxes are perfect for surface mount application. Boxes come with mounting screws and adhesive tape, cable tie for strain relief. Snap on cover for easy closure or access which will accommodate keystone jack. Write-on label with holder for easy designation of different system or station.

Mounting a flush mount wall plate without a black box is easy. Brackets insert into wall opening, flexible tabs bend up to secure the bracket to the opening. Standard screw holes accept all wall plate configurations.